CERAMIC MEMBRANE
Ceramic membrane plates, modules and complete filtration systems supplied according to project requirements.
Selection and system configuration are based on feed conditions, treatment objectives, required capacity, operating conditions and confirmed supply scope.
Request Project Review →PRODUCT RANGE
Ceramic membrane is an independent product line. The required equipment scope is confirmed for each project.
For plate supply, replacement inquiries or project equipment requirements. Configuration is selected according to the required membrane system and project conditions. Replacement compatibility must be reviewed against the existing equipment before selection.
Plates can be configured into membrane modules according to project requirements. The assembly arrangement and installation interfaces are confirmed during project review.
Complete filtration systems or units can be supplied according to the confirmed project scope. A system may include a membrane section, feed arrangement, filtration section, cleaning or backwash arrangement, instrumentation, controls and associated piping. The quotation identifies what is included, optional or supplied by others.
SYSTEM INTEGRATION
Ceramic membrane filtration can be selected as the membrane-filtration stage in an integrated water treatment or water supply system when appropriate for the confirmed project conditions.
Raw Water → Pre-filtration → Membrane Filtration → Disinfection → Treated Water Storage → Constant Pressure Supply
The membrane-filtration stage may use UF or ceramic membrane technology following project review. These technologies are not directly interchangeable without design review.
Intelligent Integrated Water Supply System →APPLICATION REVIEW
Potential applications are evaluated according to feed characteristics, treatment objectives and operating conditions.
Suitability and the acceptance basis are confirmed for the proposed application after review of the feed and treatment requirements.
PROJECT REVIEW
Review feed characteristics, available analysis and existing pretreatment before selecting the membrane arrangement.
Define the treatment objective, operating conditions and cleaning requirements for the proposed duty.
Confirm equipment interfaces and responsibilities for the membrane section, associated equipment and site integration.
PROJECT INQUIRY
Send the available project information for an initial scope review.
| Information | What to provide |
|---|---|
| Project / application | Describe the project and intended application. |
| Feed water or liquid type | Identify the source and the liquid to be treated. |
| Water-quality / liquid-analysis report | Share a representative analysis report if available. |
| Required treatment capacity | State the required treatment quantity and demand pattern. |
| Treatment objective | Describe the intended output and acceptance requirements. |
| Existing pretreatment | List the equipment and treatment steps already in place. |
| Operating schedule | Describe operating hours and any intermittent demand. |
| Installation conditions | Describe the site, available space and equipment interfaces. |
| Available power | Confirm the available electrical supply. |
| Required supply scope | Specify plates, modules or a complete system, and identify equipment supplied by others. |
Detailed membrane specifications and equipment configuration are provided after inquiry and project requirements are reviewed and confirmed.
Send Project Requirements →